Italy is about to amend migration rules for stainless steel cutting implements--STQ Testing Services Co.,Ltd. --STQ Testing Services Co.,Ltd.

T: 400 656 0655

Home About Us Certification Business News Testing Process Laboratory Contact Us

News

Contact Us

Tel：400-656-0655
+86-512-67991866
Fax：+86-512-87661802
E-mail：service@stq-cert.com
Address：Building one, 15 Yinzhu Road, Suzhou New District , China

Press Releases

Italy is about to amend migration rules for stainless steel cutting implements

Time：2015-05-14 10:35:42

Recently the European Commission have been notified that Italy is about to change rules on the testing conditions for measuring the migration of chromium, nickel and manganese for stainless steel intended to come into contact with foodstuffs.

The provisions relating to the draft regulation notified concern the amendment of the testing conditions for determining the overall and specific migration (Cr, Ni, Mn) for cooking and dining cutting implements, and the amendment of the testing conditions for determining the overall and specific migration (Cr, Ni, Mn) for objects used in contact with water (such as domestic coffee makers).

Notification No:2015/213/I

Date received: 22/04/2015

End of standstill: 23/07/2015

Regulation concerned:

The Health Ministry decree of 21 March 1973, relating exclusively to stainless steel

Testing conditions for overall and specific migration(Cr, Ni, Mn) of stainless steel

Before amending

After amending (draft)

1.For reusable objects: three successive “attacks”;

2.For prolonged contact at room temperature: 3% acetic acid for 10 days at 40°C;

3.For short periods with heat or at room temperature: 3% acetic acid at 100°C for 30 minutes;

Point 1、2、3: same as left column listed;

4.For cooking and dining cutting implements used for short periods with heat or at room temperature: 3% acetic acid at 70°C for 30 minutes;

5.For short periods with heat or at room temperature that only in contact with water: distilled water at 100°C for 30 minutes.

TIPS:

According to Directive 98/34/EC, Member States must inform the Commission of any draft technical regulation prior to its adoption. Starting from the date of notification of the draft, a three-month standstill period – during which the notifying Member State cannot adopt the technical regulation in question – enables the Commission and the other Member States to examine the notified text and to respond appropriately.

Further Information:

Notification