|
1.Shall not be placed on the market
(a)as a substance on its own;
(b)as a constituent of other substances; or
(c)in mixtures;
in a concentration equal to or greater than 0,1 % by weight of
the respective substance after 6 June 2026.
2.Shall not be used as a solvent for the dry cleaning of
textiles, leather and fur after 6 June 2026.
3.By way of derogation:
(a)for D4 and D5 in wash-off cosmetic products, paragraph 1,
point (c), shall apply after 31 January 2020.
For the purposes of this point, “wash-off cosmetic products”
means cosmetic products as defined in Article 2(1), point (a), of Regulation
(EC) No 1223/2009 of the European Parliament and of the Council (*1) that,
under normal conditions of use, are washed off with water after application;
(b)for all cosmetic products other than the ones mentioned in
paragraph 3(a), paragraph 1 shall apply after 6 June 2027;
(c)for devices as defined in Article 1(4) of Regulation (EU)
2017/745 of the European Parliament and of the Council (*2) and in Article
1(2) of Regulation (EU) 2017/746 of the European Parliament and the Council
(*3), paragraph 1 shall apply after 6 June 2031;
(d)for medicinal products, as defined in Article 1, point 2, of
Directive 2001/83/EC, and for veterinary medicinal products, as defined in
Article 4(1) of Regulation (EU) 2019/6 (*4), paragraph 1 shall apply after 6
June 2031;
(e)for D5 as a solvent in the dry cleaning of textiles, leather
and fur, paragraphs 1 and 2 shall apply after 6 June 2034.
4.By way of derogation, paragraph 1 shall not apply to the:
(a)placing on the market of D4, D5 and D6 for the following
industrial uses:
—as a monomer in
the production of silicone polymer,
—as an
intermediate in the production of other silicon substances,
—as a monomer in
polymerisation,
—in the
formulation or (re)packing of mixtures,
—in the
production of articles,
—in non-metal
surface treatment;
(b)placing on the market of D5 and D6 for use as devices, as
defined in Article 1(4) of Regulation (EU) 2017/745, for the treatment and
care of scars and wounds, the prevention of wounds and the care of stoma;
(c)placing on the market of D5 for professional use in the
cleaning or restoration of art and antiques;
(d)placing on the market of D4, D5 and D6 for use as laboratory
reagent in research and development activities carried out under controlled
conditions.
5.By way of derogation, paragraph 1, point (b), shall not apply
to the placing on the market of D4, D5 and D6:
—as a
constituent of a silicone polymer on its own,
—as a
constituent of a silicone polymer in a mixture derogated under paragraph 6.
6.By way of derogation, paragraph 1, point (c), shall not apply
to the placing on the market of mixtures that contain D4, D5 or D6 as
residues from silicone polymers, under the following conditions:
(a)D4, D5 or D6 in a concentration equal to or less than 1 % by
weight of the respective substance in the mixture, for use in adhesion,
sealing, gluing and casting;
(b)D4 in a concentration equal to or less than 0,5 % by weight,
or D5 or D6 in a concentration equal to or less than 0,3 % by weight of
either substance in the mixture for use as protective coatings (including
marine coatings);
(c)D4, D5 or D6 in a concentration equal to or less than 0,2 %
by weight of the respective substance in the mixture, for use as devices as
defined in Article 1(4) of Regulation (EU) 2017/745 and in Article 1(2) of
Regulation (EU) 2017/746, other than the devices referred to in paragraph
6(d);
(d)D5 in a concentration equal to or less than 0,3 % by weight
in the mixture or D6 in a concentration equal to or less than 1 % by weight
in the mixture, for use as devices as defined in Article 1(4) of Regulation
(EU) 2017/745, for dental impression;
(e)D4 in a concentration equal to or less than 0,2 % by weight
in the mixture, or D5 or D6 in a concentration equal to or less than 1 % by
weight of either substance in the mixture for use as silicone insoles for
horses, or as horseshoes;
(f)D4, D5 or D6 in a concentration equal to or less than 0,5 %
by weight of the respective substance in the mixture, for use as adhesion
promoters;
(g)D4, D5 or D6 in a concentration equal to or less than 1 % by
weight of the respective substance in the mixture, for use in 3D-printing;
(h)D5 in a concentration equal to or less than 1 % by weight in
the mixture or D6 in a concentration equal to or less than 3 % by weight in
the mixture, for rapid prototyping and mould making, or high performance uses
stabilised by quartz filler;
(i)D5 or D6 in a concentration equal to or less than 1 % by
weight of either substance in the mixture, for use in pad printing, or
manufacturing of printing pads;
(j)D6 in a concentration equal to or less than 1 % by weight of
the mixture, for professional use in the cleaning or restoration of art and
antiques.
7.By way of derogation, paragraphs 1 and 2 shall not apply to
the placing on the market for use, or to the use, of D5 as a solvent in
strictly controlled closed dry cleaning systems for textile, leather and fur,
where the cleaning solvent is recycled or incinerated.
|
